Adapting architectural form to digital fabrication constraints

פרסום מחקרי: פרק בספר / בדוח / בכנספרסום בספר כנסביקורת עמיתים

תקציר

Today, architects can conceive an almost infinite variety of complex
3D geometries using modelling software. However, the realization of
these geometries is still limited by the capabilities and constraints of
the fabrication machinery. The modelling platforms used to design the
geometries are still not able to evaluate fabrication parameters such
as feasibility and machining time. This makes architects are dependent
upon fabricator input for introducing fabrication considerations into the
creative process, so that they can rationalize their designs.
To bridge this gap, we present a near real time method for the
analysis and evaluation of the fabrication potential of molds for complex
geometries. Our method can approximate the feasibility, material use,
and machining time required for the fabrication of molds for concrete
façade elements. The method was developed for mainstream mold
fabrication techniques such as cutting and assembly of sheet materials as well as milling of volumetric material. It was further expanded
to include robotic hot wire cutting, a state of the art mold fabrication
technique.
The method described provides numeric and graphic evaluation
results for complex geometries in a few seconds. Its high speed makes
it useful for interactive, fabrication aware design and for computational
optimization. In this paper, we outline the need for such a method,
explain its main algorithms and show case studies where it was used
for design rationalization.
שפה מקוריתאנגלית אמריקאית
כותר פרסום המארחAAG2018
כותר משנה של פרסום המארחAdvances in Architectural Geometry 2018
עורכיםLars Hesselgren, Axel Kilian, Samar Malek, Karl-Gunnar Olsson, Olga Sorkine-Hornung, Chris Williams
מקום הפרסוםVienna
עמודים10-33
מספר עמודים23
סטטוס פרסוםפורסם - ספט׳ 2018
אירועAdvances in Architectural Geometry
Conference 2018
- Chalmers University of Technology, Gothenburg, שבדיה
משך הזמן: 22 ספט׳ 201825 ספט׳ 2018

כנס

כנסAdvances in Architectural Geometry
Conference 2018
כותר מקוצרAAG2018
מדינה/אזורשבדיה
עירGothenburg
תקופה22/09/1825/09/18

טביעת אצבע

להלן מוצגים תחומי המחקר של הפרסום 'Adapting architectural form to digital fabrication constraints'. יחד הם יוצרים טביעת אצבע ייחודית.

פורמט ציטוט ביבליוגרפי