Abstract
Ultrasound detection is commonly performed by piezoelectric transducers that are optimized for a specific application. Since the piezoelectric technology is not configurable, transducers designed for one application may not be compatible with other applications. In addition, some designs of ultrasound transducers may be difficult to implement owing to production constraints. In this paper, we propose a simple, low-cost method to reconfigure the geometry of ultrasound transducers. The technique is based on using apertures in thin sheets of acoustic blockers. We experimentally demonstrate this method for an ultrasound transducer with a central frequency of 1 MHz and show that it can emulate detectors of various sizes. An added advantage of this technique is its capability to achieve semi-isotropic detection sensitivity due to diffraction when the aperture size is comparable to the acoustic wavelength even when the angular sensitivity of the transducer is inherently limited.
Original language | English |
---|---|
Article number | 8113479 |
Pages (from-to) | 120-126 |
Number of pages | 7 |
Journal | IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control |
Volume | 65 |
Issue number | 1 |
DOIs | |
State | Published - Jan 2018 |
Keywords
- Ultrasonic imaging
- ultrasonic transducers
All Science Journal Classification (ASJC) codes
- Instrumentation
- Acoustics and Ultrasonics
- Electrical and Electronic Engineering