Multi-output portable solar charger for Li-Ion batteries

M. Sitbon; S. Gadelovits; A. Kuperman

doi:10.1049/cp.2014.0430

Multi-output portable solar charger for Li-Ion batteries

M. Sitbon
, S. Gadelovits
, A. Kuperman

Department of Electrical and Electronics Engineering

Ariel University

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

The paper describes design process and functionality of a portable two-way solar charger prototype, achieving energy density of 571 Wh·kg ^-1 during a typical 3-day infantry mission. The device may instantaneously charge up to two Li-Ion MR-2791 batteries, supporting plug-and-play operation. The system consists of a lightweight custom solar panel, based on 20% efficient mono-crystalline photovoltaics, and an intelligent power processing module, supporting both maximum power point tracking of the solar panel and multimode charging of Li-Ion packs while instantaneously communicating with the batteries. Experimental results of system testing under real outdoor conditions are presented to demonstrate the device functionality and energy yield capabilities.

Original language	English
Title of host publication	7th IET International Conference on Power Electronics, Machines and Drives, PEMD 2014
Publisher	Institution of Engineering and Technology
Edition	628 CP
ISBN (Print)	9781849198158
DOIs	https://doi.org/10.1049/cp.2014.0430
State	Published - 1 Jan 2014
Event	7th IET International Conference on Power Electronics, Machines and Drives, PEMD 2014 - Manchester, United Kingdom Duration: 8 Apr 2014 → 10 Apr 2014

Publication series

Name	IET Conference Publications
Number	628 CP
Volume	2014

Conference

Conference	7th IET International Conference on Power Electronics, Machines and Drives, PEMD 2014
Country/Territory	United Kingdom
City	Manchester
Period	8/04/14 → 10/04/14

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

Energy density
Li-Ion battery
Solar panel

ASJC Scopus subject areas

Electrical and Electronic Engineering

Access to Document

10.1049/cp.2014.0430

Cite this

@inproceedings{60433c4cb5814e5c82b0be7c337d4222,

title = "Multi-output portable solar charger for Li-Ion batteries",

abstract = "The paper describes design process and functionality of a portable two-way solar charger prototype, achieving energy density of 571 Wh·kg -1 during a typical 3-day infantry mission. The device may instantaneously charge up to two Li-Ion MR-2791 batteries, supporting plug-and-play operation. The system consists of a lightweight custom solar panel, based on 20\% efficient mono-crystalline photovoltaics, and an intelligent power processing module, supporting both maximum power point tracking of the solar panel and multimode charging of Li-Ion packs while instantaneously communicating with the batteries. Experimental results of system testing under real outdoor conditions are presented to demonstrate the device functionality and energy yield capabilities.",

keywords = "Energy density, Li-Ion battery, Solar panel",

author = "M. Sitbon and S. Gadelovits and A. Kuperman",

year = "2014",

month = jan,

day = "1",

doi = "10.1049/cp.2014.0430",

language = "English",

isbn = "9781849198158",

series = "IET Conference Publications",

publisher = "Institution of Engineering and Technology",

number = "628 CP",

booktitle = "7th IET International Conference on Power Electronics, Machines and Drives, PEMD 2014",

address = "United Kingdom",

edition = "628 CP",

note = "7th IET International Conference on Power Electronics, Machines and Drives, PEMD 2014 ; Conference date: 08-04-2014 Through 10-04-2014",

}

Sitbon, M, Gadelovits, S & Kuperman, A 2014, Multi-output portable solar charger for Li-Ion batteries. in 7th IET International Conference on Power Electronics, Machines and Drives, PEMD 2014. 628 CP edn, IET Conference Publications, no. 628 CP, vol. 2014, Institution of Engineering and Technology, 7th IET International Conference on Power Electronics, Machines and Drives, PEMD 2014, Manchester, United Kingdom, 8/04/14. https://doi.org/10.1049/cp.2014.0430

Multi-output portable solar charger for Li-Ion batteries. / Sitbon, M.; Gadelovits, S.; Kuperman, A.
7th IET International Conference on Power Electronics, Machines and Drives, PEMD 2014. 628 CP. ed. Institution of Engineering and Technology, 2014. (IET Conference Publications; Vol. 2014, No. 628 CP).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Multi-output portable solar charger for Li-Ion batteries

AU - Sitbon, M.

AU - Gadelovits, S.

AU - Kuperman, A.

PY - 2014/1/1

Y1 - 2014/1/1

N2 - The paper describes design process and functionality of a portable two-way solar charger prototype, achieving energy density of 571 Wh·kg -1 during a typical 3-day infantry mission. The device may instantaneously charge up to two Li-Ion MR-2791 batteries, supporting plug-and-play operation. The system consists of a lightweight custom solar panel, based on 20% efficient mono-crystalline photovoltaics, and an intelligent power processing module, supporting both maximum power point tracking of the solar panel and multimode charging of Li-Ion packs while instantaneously communicating with the batteries. Experimental results of system testing under real outdoor conditions are presented to demonstrate the device functionality and energy yield capabilities.

AB - The paper describes design process and functionality of a portable two-way solar charger prototype, achieving energy density of 571 Wh·kg -1 during a typical 3-day infantry mission. The device may instantaneously charge up to two Li-Ion MR-2791 batteries, supporting plug-and-play operation. The system consists of a lightweight custom solar panel, based on 20% efficient mono-crystalline photovoltaics, and an intelligent power processing module, supporting both maximum power point tracking of the solar panel and multimode charging of Li-Ion packs while instantaneously communicating with the batteries. Experimental results of system testing under real outdoor conditions are presented to demonstrate the device functionality and energy yield capabilities.

KW - Energy density

KW - Li-Ion battery

KW - Solar panel

UR - https://www.scopus.com/pages/publications/84901830379

UR - https://www.scopus.com/pages/publications/84907393760

U2 - 10.1049/cp.2014.0430

DO - 10.1049/cp.2014.0430

M3 - Conference contribution

SN - 9781849198158

T3 - IET Conference Publications

BT - 7th IET International Conference on Power Electronics, Machines and Drives, PEMD 2014

PB - Institution of Engineering and Technology

T2 - 7th IET International Conference on Power Electronics, Machines and Drives, PEMD 2014

Y2 - 8 April 2014 through 10 April 2014

ER -

Multi-output portable solar charger for Li-Ion batteries

Abstract

Publication series

Conference

UN SDGs

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this