Mode I and Mode II fracture energy of MWCNT reinforced nanofibrilmats interleaved carbon/epoxy laminates

Shay Hamer; Herman Leibovich; Anthony Green; Ron Avrahami; Eyal Zussman; Arnon Siegmann; Dov Sherman

doi:10.1016/j.compscitech.2013.10.013

Mode I and Mode II fracture energy of MWCNT reinforced nanofibrilmats interleaved carbon/epoxy laminates

Shay Hamer, Herman Leibovich, Anthony Green, Ron Avrahami, Eyal Zussman, Arnon Siegmann, Dov Sherman

Technion - Israel Institute of Technology

Research output: Contribution to journal › Article › peer-review

Abstract

Laboratory scale carbon/epoxy laminates were interleaved with electrospun Nylon 66 nanofibrilmat reinforced with multi wall carbon nanotubes (MWCNTs). The effect of the MWCNTs on the fracture energy was evaluated under Mode I and Mode II loading. It is shown that while nanofibrilmat interleaving resulted in a 3 times increase of the Mode I fracture energy compared to the non-interleaved laminates and the MWCNT reinforced nanofibrilmat interleaving resulted in a 4 times increase. Evaluation of the Mode II fracture energy indicated a 40% increase as a result of nanofibrilmats interleaving, while MWCNT reinforced nanofibrilmat interleaving resulted in a 60% increase. Mechanisms for the fracture energy increase of the MWCNT reinforced nanofibrilmats are suggested based on the test data and fractographic study of post-test specimen surfaces.

Original language	English
Pages (from-to)	48-56
Number of pages	9
Journal	Composites Science and Technology
Volume	90
DOIs	https://doi.org/10.1016/j.compscitech.2013.10.013
State	Published - 10 Jan 2014

Keywords

A. Carbon nanotubes
A. Hybrid composites
A. Laminate
B. Fracture
B. Interface

All Science Journal Classification (ASJC) codes

Ceramics and Composites
General Engineering

Access to Document

10.1016/j.compscitech.2013.10.013

Cite this

@article{2fa331e10e424206a1a08a5a6e431ac4,

title = "Mode I and Mode II fracture energy of MWCNT reinforced nanofibrilmats interleaved carbon/epoxy laminates",

abstract = "Laboratory scale carbon/epoxy laminates were interleaved with electrospun Nylon 66 nanofibrilmat reinforced with multi wall carbon nanotubes (MWCNTs). The effect of the MWCNTs on the fracture energy was evaluated under Mode I and Mode II loading. It is shown that while nanofibrilmat interleaving resulted in a 3 times increase of the Mode I fracture energy compared to the non-interleaved laminates and the MWCNT reinforced nanofibrilmat interleaving resulted in a 4 times increase. Evaluation of the Mode II fracture energy indicated a 40\% increase as a result of nanofibrilmats interleaving, while MWCNT reinforced nanofibrilmat interleaving resulted in a 60\% increase. Mechanisms for the fracture energy increase of the MWCNT reinforced nanofibrilmats are suggested based on the test data and fractographic study of post-test specimen surfaces.",

keywords = "A. Carbon nanotubes, A. Hybrid composites, A. Laminate, B. Fracture, B. Interface",

author = "Shay Hamer and Herman Leibovich and Anthony Green and Ron Avrahami and Eyal Zussman and Arnon Siegmann and Dov Sherman",

note = "Funding Information: This work was supported by IAI and the “Nanotubes Empowerment Solutions (NES)” program of the Ministry of Industry, Trade \& Labor, Israel. The authors wish to thank Arkema Inc. for supplying the commercial polyamide pellets.",

year = "2014",

month = jan,

day = "10",

doi = "10.1016/j.compscitech.2013.10.013",

language = "الإنجليزيّة",

volume = "90",

pages = "48--56",

journal = "Composites Science and Technology",

issn = "0266-3538",

publisher = "Elsevier B.V.",

}

TY - JOUR

T1 - Mode I and Mode II fracture energy of MWCNT reinforced nanofibrilmats interleaved carbon/epoxy laminates

AU - Hamer, Shay

AU - Leibovich, Herman

AU - Green, Anthony

AU - Avrahami, Ron

AU - Zussman, Eyal

AU - Siegmann, Arnon

AU - Sherman, Dov

N1 - Funding Information: This work was supported by IAI and the “Nanotubes Empowerment Solutions (NES)” program of the Ministry of Industry, Trade & Labor, Israel. The authors wish to thank Arkema Inc. for supplying the commercial polyamide pellets.

PY - 2014/1/10

Y1 - 2014/1/10

N2 - Laboratory scale carbon/epoxy laminates were interleaved with electrospun Nylon 66 nanofibrilmat reinforced with multi wall carbon nanotubes (MWCNTs). The effect of the MWCNTs on the fracture energy was evaluated under Mode I and Mode II loading. It is shown that while nanofibrilmat interleaving resulted in a 3 times increase of the Mode I fracture energy compared to the non-interleaved laminates and the MWCNT reinforced nanofibrilmat interleaving resulted in a 4 times increase. Evaluation of the Mode II fracture energy indicated a 40% increase as a result of nanofibrilmats interleaving, while MWCNT reinforced nanofibrilmat interleaving resulted in a 60% increase. Mechanisms for the fracture energy increase of the MWCNT reinforced nanofibrilmats are suggested based on the test data and fractographic study of post-test specimen surfaces.

AB - Laboratory scale carbon/epoxy laminates were interleaved with electrospun Nylon 66 nanofibrilmat reinforced with multi wall carbon nanotubes (MWCNTs). The effect of the MWCNTs on the fracture energy was evaluated under Mode I and Mode II loading. It is shown that while nanofibrilmat interleaving resulted in a 3 times increase of the Mode I fracture energy compared to the non-interleaved laminates and the MWCNT reinforced nanofibrilmat interleaving resulted in a 4 times increase. Evaluation of the Mode II fracture energy indicated a 40% increase as a result of nanofibrilmats interleaving, while MWCNT reinforced nanofibrilmat interleaving resulted in a 60% increase. Mechanisms for the fracture energy increase of the MWCNT reinforced nanofibrilmats are suggested based on the test data and fractographic study of post-test specimen surfaces.

KW - A. Carbon nanotubes

KW - A. Hybrid composites

KW - A. Laminate

KW - B. Fracture

KW - B. Interface

UR - http://www.scopus.com/inward/record.url?scp=84888022465&partnerID=8YFLogxK

U2 - 10.1016/j.compscitech.2013.10.013

DO - 10.1016/j.compscitech.2013.10.013

M3 - مقالة

SN - 0266-3538

VL - 90

SP - 48

EP - 56

JO - Composites Science and Technology

JF - Composites Science and Technology

ER -

Mode I and Mode II fracture energy of MWCNT reinforced nanofibrilmats interleaved carbon/epoxy laminates

Abstract

Keywords

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this