Laser Transfer of Metals and Metal Alloys for Digital Microfabrication of 3D Objects

Michael Zenou; Amir Sa'Ar; Zvi Kotler

doi:10.1002/smll.201500612

Laser Transfer of Metals and Metal Alloys for Digital Microfabrication of 3D Objects

Michael Zenou, Amir Sa'Ar, Zvi Kotler

Racah Institute of Physics

The Hebrew University of Jerusalem

Research output: Contribution to journal › Article › peer-review

Abstract

3D copper logos printed on epoxy glass laminates are demonstrated. The structures are printed using laser transfer of molten metal microdroplets. The example in the image shows letters of 50 μm width, with each letter being taller than the last, from a height of 40 μm ('s') to 190 μm ('l'). The scanning microscopy image is taken at a tilt, and the topographic image was taken using interferometric 3D microscopy, to show the effective control of this technique.

Original language	English
Pages (from-to)	4082-4089
Number of pages	8
Journal	Small
Volume	11
Issue number	33
DOIs	https://doi.org/10.1002/smll.201500612
State	Published - 1 Sep 2015

Keywords

3D printing
laser direct writing
laser transfer
laser-induced forward transfer
printed electronics

All Science Journal Classification (ASJC) codes

Biotechnology
Biomaterials
General Chemistry
General Materials Science

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.1002/smll.201500612

Cite this

@article{e0eb3e9301df4c06977ce049143e4405,

title = "Laser Transfer of Metals and Metal Alloys for Digital Microfabrication of 3D Objects",

abstract = "3D copper logos printed on epoxy glass laminates are demonstrated. The structures are printed using laser transfer of molten metal microdroplets. The example in the image shows letters of 50 μm width, with each letter being taller than the last, from a height of 40 μm ('s') to 190 μm ('l'). The scanning microscopy image is taken at a tilt, and the topographic image was taken using interferometric 3D microscopy, to show the effective control of this technique.",

keywords = "3D printing, laser direct writing, laser transfer, laser-induced forward transfer, printed electronics",

author = "Michael Zenou and Amir Sa'Ar and Zvi Kotler",

note = "Publisher Copyright: {\textcopyright} 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.",

year = "2015",

month = sep,

day = "1",

doi = "10.1002/smll.201500612",

language = "الإنجليزيّة",

volume = "11",

pages = "4082--4089",

journal = "Small",

issn = "1613-6810",

publisher = "Wiley-VCH Verlag",

number = "33",

}

TY - JOUR

T1 - Laser Transfer of Metals and Metal Alloys for Digital Microfabrication of 3D Objects

AU - Zenou, Michael

AU - Sa'Ar, Amir

AU - Kotler, Zvi

PY - 2015/9/1

Y1 - 2015/9/1

N2 - 3D copper logos printed on epoxy glass laminates are demonstrated. The structures are printed using laser transfer of molten metal microdroplets. The example in the image shows letters of 50 μm width, with each letter being taller than the last, from a height of 40 μm ('s') to 190 μm ('l'). The scanning microscopy image is taken at a tilt, and the topographic image was taken using interferometric 3D microscopy, to show the effective control of this technique.

AB - 3D copper logos printed on epoxy glass laminates are demonstrated. The structures are printed using laser transfer of molten metal microdroplets. The example in the image shows letters of 50 μm width, with each letter being taller than the last, from a height of 40 μm ('s') to 190 μm ('l'). The scanning microscopy image is taken at a tilt, and the topographic image was taken using interferometric 3D microscopy, to show the effective control of this technique.

KW - 3D printing

KW - laser direct writing

KW - laser transfer

KW - laser-induced forward transfer

KW - printed electronics

UR - http://www.scopus.com/inward/record.url?scp=84940792406&partnerID=8YFLogxK

U2 - 10.1002/smll.201500612

DO - 10.1002/smll.201500612

M3 - مقالة

SN - 1613-6810

VL - 11

SP - 4082

EP - 4089

JO - Small

JF - Small

IS - 33

ER -

Laser Transfer of Metals and Metal Alloys for Digital Microfabrication of 3D Objects

Abstract

Keywords

All Science Journal Classification (ASJC) codes

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this