High-Temperature Treatment of Li-Rich Cathode Materials with Ammonia: Improved Capacity and Mean Voltage Stability during Cycling

Evan M. Erickson; Hadar Sclar; Florian Schipper; Jing Liu; Ruiyuan Tian; Chandan Ghanty; Larisa Burstein; Nicole Leifer; Judith Grinblat; Michael Talianker; Ji Yong Shin; Jordan K. Lampert; Boris Markovsky; Anatoly I. Frenkel; Doron Aurbach

doi:10.1002/aenm.201700708

High-Temperature Treatment of Li-Rich Cathode Materials with Ammonia: Improved Capacity and Mean Voltage Stability during Cycling

Evan M. Erickson, Hadar Sclar, Florian Schipper, Jing Liu, Ruiyuan Tian, Chandan Ghanty, Larisa Burstein, Nicole Leifer, Judith Grinblat, Michael Talianker, Ji Yong Shin, Jordan K. Lampert, Boris Markovsky, Anatoly I. Frenkel, Doron Aurbach

Tel Aviv University, Bar-Ilan University, Ben-Gurion University of the Negev

Research output: Contribution to journal › Article › peer-review

Abstract

Li-rich electrode materials of the family xLi₂MnO₃·(1−x)LiNi_aCo_bMn_cO₂ (a + b + c = 1) suffer a voltage fade upon cycling that limits their utilization in commercial batteries despite their extremely high discharge capacity, ≈250 mA h g⁻¹. Li-rich, 0.35Li₂MnO₃·0.65LiNi_0.35Mn_0.45Co_0.20O₂, is exposed to NH₃ at 400 °C, producing materials with improved characteristics: enhanced electrode capacity and a limited average voltage fade during 100 cycles in half cells versus Li. Three main changes caused by NH₃ treatment are established. First, a general bulk reduction of Co and Mn is observed via X-ray photoelectron spectroscopy and X-ray absorption near edge structure. Next, a structural rearrangement lowers the coordination number of CoO and MnO bonds, as well as formation of a surface spinel-like structure. Additionally, Li⁺ removal from the bulk causes the formation of surface LiOH, Li₂CO₃, and Li₂O. These structural and surface changes can enhance the voltage and capacity stability of the Li-rich material electrodes after moderate NH₃ treatment times of 1–2 h.

Original language	English
Journal	Advanced Energy Materials
Volume	7
Issue number	18
DOIs	https://doi.org/10.1002/aenm.201700708
State	Published - 20 Sep 2017

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

ammonia treatment
cathodes
lithium-ion batteries
lithium-rich materials
stabilization
voltage fade

All Science Journal Classification (ASJC) codes

Renewable Energy, Sustainability and the Environment
General Materials Science

Access to Document

10.1002/aenm.201700708

Cite this

Erickson, E. M., Sclar, H., Schipper, F., Liu, J., Tian, R., Ghanty, C., Burstein, L., Leifer, N., Grinblat, J., Talianker, M., Shin, J. Y., Lampert, J. K., Markovsky, B., Frenkel, A. I., & Aurbach, D. (2017). High-Temperature Treatment of Li-Rich Cathode Materials with Ammonia: Improved Capacity and Mean Voltage Stability during Cycling. Advanced Energy Materials, 7(18). https://doi.org/10.1002/aenm.201700708

@article{d8be3fcb46bd4963b82f867616e4dfac,

title = "High-Temperature Treatment of Li-Rich Cathode Materials with Ammonia: Improved Capacity and Mean Voltage Stability during Cycling",

abstract = "Li-rich electrode materials of the family xLi2MnO3·(1−x)LiNiaCobMncO2 (a + b + c = 1) suffer a voltage fade upon cycling that limits their utilization in commercial batteries despite their extremely high discharge capacity, ≈250 mA h g−1. Li-rich, 0.35Li2MnO3·0.65LiNi0.35Mn0.45Co0.20O2, is exposed to NH3 at 400 °C, producing materials with improved characteristics: enhanced electrode capacity and a limited average voltage fade during 100 cycles in half cells versus Li. Three main changes caused by NH3 treatment are established. First, a general bulk reduction of Co and Mn is observed via X-ray photoelectron spectroscopy and X-ray absorption near edge structure. Next, a structural rearrangement lowers the coordination number of CoO and MnO bonds, as well as formation of a surface spinel-like structure. Additionally, Li+ removal from the bulk causes the formation of surface LiOH, Li2CO3, and Li2O. These structural and surface changes can enhance the voltage and capacity stability of the Li-rich material electrodes after moderate NH3 treatment times of 1–2 h.",

keywords = "ammonia treatment, cathodes, lithium-ion batteries, lithium-rich materials, stabilization, voltage fade",

author = "Erickson, \{Evan M.\} and Hadar Sclar and Florian Schipper and Jing Liu and Ruiyuan Tian and Chandan Ghanty and Larisa Burstein and Nicole Leifer and Judith Grinblat and Michael Talianker and Shin, \{Ji Yong\} and Lampert, \{Jordan K.\} and Boris Markovsky and Frenkel, \{Anatoly I.\} and Doron Aurbach",

note = "Publisher Copyright: {\textcopyright} 2017 WILEY-VCH Verlag GmbH \& Co. KGaA, Weinheim",

year = "2017",

month = sep,

day = "20",

doi = "10.1002/aenm.201700708",

language = "الإنجليزيّة",

volume = "7",

journal = "Advanced Energy Materials",

issn = "1614-6832",

publisher = "John Wiley and Sons Inc.",

number = "18",

}

Erickson, EM, Sclar, H, Schipper, F, Liu, J, Tian, R, Ghanty, C, Burstein, L, Leifer, N, Grinblat, J, Talianker, M, Shin, JY, Lampert, JK, Markovsky, B, Frenkel, AI & Aurbach, D 2017, 'High-Temperature Treatment of Li-Rich Cathode Materials with Ammonia: Improved Capacity and Mean Voltage Stability during Cycling', Advanced Energy Materials, vol. 7, no. 18. https://doi.org/10.1002/aenm.201700708

TY - JOUR

T1 - High-Temperature Treatment of Li-Rich Cathode Materials with Ammonia

T2 - Improved Capacity and Mean Voltage Stability during Cycling

AU - Erickson, Evan M.

AU - Sclar, Hadar

AU - Schipper, Florian

AU - Liu, Jing

AU - Tian, Ruiyuan

AU - Ghanty, Chandan

AU - Burstein, Larisa

AU - Leifer, Nicole

AU - Grinblat, Judith

AU - Talianker, Michael

AU - Shin, Ji Yong

AU - Lampert, Jordan K.

AU - Markovsky, Boris

AU - Frenkel, Anatoly I.

AU - Aurbach, Doron

PY - 2017/9/20

Y1 - 2017/9/20

N2 - Li-rich electrode materials of the family xLi2MnO3·(1−x)LiNiaCobMncO2 (a + b + c = 1) suffer a voltage fade upon cycling that limits their utilization in commercial batteries despite their extremely high discharge capacity, ≈250 mA h g−1. Li-rich, 0.35Li2MnO3·0.65LiNi0.35Mn0.45Co0.20O2, is exposed to NH3 at 400 °C, producing materials with improved characteristics: enhanced electrode capacity and a limited average voltage fade during 100 cycles in half cells versus Li. Three main changes caused by NH3 treatment are established. First, a general bulk reduction of Co and Mn is observed via X-ray photoelectron spectroscopy and X-ray absorption near edge structure. Next, a structural rearrangement lowers the coordination number of CoO and MnO bonds, as well as formation of a surface spinel-like structure. Additionally, Li+ removal from the bulk causes the formation of surface LiOH, Li2CO3, and Li2O. These structural and surface changes can enhance the voltage and capacity stability of the Li-rich material electrodes after moderate NH3 treatment times of 1–2 h.

AB - Li-rich electrode materials of the family xLi2MnO3·(1−x)LiNiaCobMncO2 (a + b + c = 1) suffer a voltage fade upon cycling that limits their utilization in commercial batteries despite their extremely high discharge capacity, ≈250 mA h g−1. Li-rich, 0.35Li2MnO3·0.65LiNi0.35Mn0.45Co0.20O2, is exposed to NH3 at 400 °C, producing materials with improved characteristics: enhanced electrode capacity and a limited average voltage fade during 100 cycles in half cells versus Li. Three main changes caused by NH3 treatment are established. First, a general bulk reduction of Co and Mn is observed via X-ray photoelectron spectroscopy and X-ray absorption near edge structure. Next, a structural rearrangement lowers the coordination number of CoO and MnO bonds, as well as formation of a surface spinel-like structure. Additionally, Li+ removal from the bulk causes the formation of surface LiOH, Li2CO3, and Li2O. These structural and surface changes can enhance the voltage and capacity stability of the Li-rich material electrodes after moderate NH3 treatment times of 1–2 h.

KW - ammonia treatment

KW - cathodes

KW - lithium-ion batteries

KW - lithium-rich materials

KW - stabilization

KW - voltage fade

UR - http://www.scopus.com/inward/record.url?scp=85019546840&partnerID=8YFLogxK

U2 - 10.1002/aenm.201700708

DO - 10.1002/aenm.201700708

M3 - مقالة

SN - 1614-6832

VL - 7

JO - Advanced Energy Materials

JF - Advanced Energy Materials

IS - 18

ER -

High-Temperature Treatment of Li-Rich Cathode Materials with Ammonia: Improved Capacity and Mean Voltage Stability during Cycling

Abstract

UN SDGs

Keywords

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this