Hard X-ray Photoelectron Spectroscopy Study of Electron Spectral Structure beyond the Known Signal Electron Peak

A. Givon, Eitan Tiferet, Germán Castro, Juan Rubio Zuazo, Ilan Yaar, Erez Golan, Itzhak Orion

Research output: Contribution to journalArticlepeer-review


The electron inelastic mean free path (IMFP) is commonly used in surface analysis techniques such as X-ray photo electron spectroscopy. Though numerous studies have been conducted in the quest to de ne the IMFPfi value, it is still substantiated mainly on the basis of calculations and extrapolations. Experimental methods such as elastic peak electron spectroscopy tend to rely on indirect measurements. The main disadvantage of current methods is that the signal to noise ratio decreases with the increase in layer thickness or as the electron energy decreases. The newly developed wide energy spectrum (WES) method previously published by our group allows theIMFP to be directly evaluated for di erent electron energies. It exploits the attenuated electron multiple inelasticffcollisions (MIC) peak counts to calculate mean electron energy loss, rather than use the signal-electron peaks.In contrast, currently accepted methods focus on the signal electron in the spectrum and disregard the in-formation contained in the lower-energy electrons. In understanding how to exploit this information, WES en-hanced the relevant data collection by using a wide energy region upper bounded by the signal electron energyand lower bounded by the peak MIC energy in the spectrum.In this work, we have markedly expanded the validity of the WES method by assessing the IMFP values of alow Z polymer and by using a di erent substrate to produce the photoelectrons. The experiment was performedffat the Spanish CRG Beamline (SpLine) at the European Synchrotron Radiation Facility (ESRF). Herein we presentour initial results. In addition, we improved both the raw-data analysis and the background reduction processes used in WES to obtain enhanced and more accurate results. The IMFP values of carbon and polycarbonate were evaluated and compared with those predicted by the NIST. Small differences notwithstanding, the reported IMFP were shown to be well within the uncertainty boundaries. This work shows that the electron IMFP can be evaluated in solids by directly measuring the electrons that pass-through samples of the solids of interest. For the first time, there is an orderly path to experimentally evaluate electron IMFP by using the WES method. The new method was established to address the lack of experimental IMFP values for low energy electrons in solid materials
Original languageAmerican English
Pages (from-to)601-605
Number of pages5
JournalJournal of Chemistry and Chemical Engineering
Issue number7
StatePublished - 1 Jan 2013


  • Inelastic
  • Layer
  • Scattering
  • Spin-coating
  • Synchrotron


Dive into the research topics of 'Hard X-ray Photoelectron Spectroscopy Study of Electron Spectral Structure beyond the Known Signal Electron Peak'. Together they form a unique fingerprint.

Cite this