From NORM by-products to building materials

J. Labrincha; F. Puertas; Wouter Schroeyers; K. Kovler; Y. Pontikes; C. Nuccetelli; P. Krivenko; O. Kovalchuk; O. Petropavlovsky; M. Komljenovic; E. Fidanchevski; R. Wiegers; E. Volceanov; E. Gunay; M. A. Sanjuán; V. Ducman; B. Angjusheva; D. Bajare; T. Kovacs; G. Bator; S. Schreurs; J. Aguiar; J. L. Provis

doi:10.1016/B978-0-08-102009-8.00007-4

From NORM by-products to building materials

J. Labrincha, F. Puertas, Wouter Schroeyers, K. Kovler, Y. Pontikes, C. Nuccetelli, P. Krivenko, O. Kovalchuk, O. Petropavlovsky, M. Komljenovic, E. Fidanchevski, R. Wiegers, E. Volceanov, E. Gunay, M. A. Sanjuán, V. Ducman, B. Angjusheva, D. Bajare, T. Kovacs, G. BatorS. Schreurs, J. Aguiar, J. L. Provis

Civil and Environmental Engineering

Technion - Israel Institute of Technology

Research output: Chapter in Book/Report/Conference proceeding › Chapter › peer-review

Abstract

The cementitious materials and ceramic industries are frequently looked as targets for the recycling and valorization of several wastes, residues, and by-products, generated from a wide variety of industries. In general, only technical (and chemical) aspects are covered on each attempt for recycling a waste in a particular product, while radiological features are rarely considered. This chapter aims to give new and more complete insights on the recycling of several industrial wastes, on four groups of construction materials: (1) construction materials based on Portland cements (both as cement itself and as concrete), (2) construction materials based on alkali-activated binders, (3) ceramics and glass-ceramics, and (4) gypsum.For each by-product a separate section will describe (1) the technical (and chemical) aspects of the use as part of a construction material and (2) the resulting radiological properties of the designed product, when they are available.Some ceramic industries also use radiologically active components, namely zircon and zirconia (in glazes, refractories, etc.). The radiological consequences of their production, further use/manipulation by other industrial sectors (e.g., ceramic glazes and frits production), and on the final costumers are also briefly reported.

Original language	English
Title of host publication	Naturally Occurring Radioactive Materials in Construction
Subtitle of host publication	Integrating Radiation Protection in Reuse (COST Action Tu1301 NORM4BUILDING)
Pages	183-252
Number of pages	70
ISBN (Electronic)	9780081020081
DOIs	https://doi.org/10.1016/B978-0-08-102009-8.00007-4
State	Published - 29 May 2017

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 9 Industry, Innovation, and Infrastructure

Keywords

Activity concentration index
By-product recycling
Cement
Ceramic
Concrete
Geopolymer
Phosphogypsum

All Science Journal Classification (ASJC) codes

General Environmental Science

Access to Document

10.1016/B978-0-08-102009-8.00007-4

Cite this

Labrincha, J., Puertas, F., Schroeyers, W., Kovler, K., Pontikes, Y., Nuccetelli, C., Krivenko, P., Kovalchuk, O., Petropavlovsky, O., Komljenovic, M., Fidanchevski, E., Wiegers, R., Volceanov, E., Gunay, E., Sanjuán, M. A., Ducman, V., Angjusheva, B., Bajare, D., Kovacs, T., ... Provis, J. L. (2017). From NORM by-products to building materials. In Naturally Occurring Radioactive Materials in Construction: Integrating Radiation Protection in Reuse (COST Action Tu1301 NORM4BUILDING) (pp. 183-252) https://doi.org/10.1016/B978-0-08-102009-8.00007-4

@inbook{b7a5a7e2db84465485f6aeb6ce2d323d,

title = "From NORM by-products to building materials",

abstract = "The cementitious materials and ceramic industries are frequently looked as targets for the recycling and valorization of several wastes, residues, and by-products, generated from a wide variety of industries. In general, only technical (and chemical) aspects are covered on each attempt for recycling a waste in a particular product, while radiological features are rarely considered. This chapter aims to give new and more complete insights on the recycling of several industrial wastes, on four groups of construction materials: (1) construction materials based on Portland cements (both as cement itself and as concrete), (2) construction materials based on alkali-activated binders, (3) ceramics and glass-ceramics, and (4) gypsum.For each by-product a separate section will describe (1) the technical (and chemical) aspects of the use as part of a construction material and (2) the resulting radiological properties of the designed product, when they are available.Some ceramic industries also use radiologically active components, namely zircon and zirconia (in glazes, refractories, etc.). The radiological consequences of their production, further use/manipulation by other industrial sectors (e.g., ceramic glazes and frits production), and on the final costumers are also briefly reported.",

keywords = "Activity concentration index, By-product recycling, Cement, Ceramic, Concrete, Geopolymer, Phosphogypsum",

author = "J. Labrincha and F. Puertas and Wouter Schroeyers and K. Kovler and Y. Pontikes and C. Nuccetelli and P. Krivenko and O. Kovalchuk and O. Petropavlovsky and M. Komljenovic and E. Fidanchevski and R. Wiegers and E. Volceanov and E. Gunay and Sanju{\'a}n, \{M. A.\} and V. Ducman and B. Angjusheva and D. Bajare and T. Kovacs and G. Bator and S. Schreurs and J. Aguiar and Provis, \{J. L.\}",

year = "2017",

month = may,

day = "29",

doi = "10.1016/B978-0-08-102009-8.00007-4",

language = "الإنجليزيّة",

isbn = "9780081020098",

pages = "183--252",

booktitle = "Naturally Occurring Radioactive Materials in Construction",

}

Labrincha, J, Puertas, F, Schroeyers, W, Kovler, K, Pontikes, Y, Nuccetelli, C, Krivenko, P, Kovalchuk, O, Petropavlovsky, O, Komljenovic, M, Fidanchevski, E, Wiegers, R, Volceanov, E, Gunay, E, Sanjuán, MA, Ducman, V, Angjusheva, B, Bajare, D, Kovacs, T, Bator, G, Schreurs, S, Aguiar, J & Provis, JL 2017, From NORM by-products to building materials. in Naturally Occurring Radioactive Materials in Construction: Integrating Radiation Protection in Reuse (COST Action Tu1301 NORM4BUILDING). pp. 183-252. https://doi.org/10.1016/B978-0-08-102009-8.00007-4

TY - CHAP

T1 - From NORM by-products to building materials

AU - Labrincha, J.

AU - Puertas, F.

AU - Schroeyers, Wouter

AU - Kovler, K.

AU - Pontikes, Y.

AU - Nuccetelli, C.

AU - Krivenko, P.

AU - Kovalchuk, O.

AU - Petropavlovsky, O.

AU - Komljenovic, M.

AU - Fidanchevski, E.

AU - Wiegers, R.

AU - Volceanov, E.

AU - Gunay, E.

AU - Sanjuán, M. A.

AU - Ducman, V.

AU - Angjusheva, B.

AU - Bajare, D.

AU - Kovacs, T.

AU - Bator, G.

AU - Schreurs, S.

AU - Aguiar, J.

AU - Provis, J. L.

PY - 2017/5/29

Y1 - 2017/5/29

N2 - The cementitious materials and ceramic industries are frequently looked as targets for the recycling and valorization of several wastes, residues, and by-products, generated from a wide variety of industries. In general, only technical (and chemical) aspects are covered on each attempt for recycling a waste in a particular product, while radiological features are rarely considered. This chapter aims to give new and more complete insights on the recycling of several industrial wastes, on four groups of construction materials: (1) construction materials based on Portland cements (both as cement itself and as concrete), (2) construction materials based on alkali-activated binders, (3) ceramics and glass-ceramics, and (4) gypsum.For each by-product a separate section will describe (1) the technical (and chemical) aspects of the use as part of a construction material and (2) the resulting radiological properties of the designed product, when they are available.Some ceramic industries also use radiologically active components, namely zircon and zirconia (in glazes, refractories, etc.). The radiological consequences of their production, further use/manipulation by other industrial sectors (e.g., ceramic glazes and frits production), and on the final costumers are also briefly reported.

AB - The cementitious materials and ceramic industries are frequently looked as targets for the recycling and valorization of several wastes, residues, and by-products, generated from a wide variety of industries. In general, only technical (and chemical) aspects are covered on each attempt for recycling a waste in a particular product, while radiological features are rarely considered. This chapter aims to give new and more complete insights on the recycling of several industrial wastes, on four groups of construction materials: (1) construction materials based on Portland cements (both as cement itself and as concrete), (2) construction materials based on alkali-activated binders, (3) ceramics and glass-ceramics, and (4) gypsum.For each by-product a separate section will describe (1) the technical (and chemical) aspects of the use as part of a construction material and (2) the resulting radiological properties of the designed product, when they are available.Some ceramic industries also use radiologically active components, namely zircon and zirconia (in glazes, refractories, etc.). The radiological consequences of their production, further use/manipulation by other industrial sectors (e.g., ceramic glazes and frits production), and on the final costumers are also briefly reported.

KW - Activity concentration index

KW - By-product recycling

KW - Cement

KW - Ceramic

KW - Concrete

KW - Geopolymer

KW - Phosphogypsum

UR - http://www.scopus.com/inward/record.url?scp=85037992895&partnerID=8YFLogxK

U2 - 10.1016/B978-0-08-102009-8.00007-4

DO - 10.1016/B978-0-08-102009-8.00007-4

M3 - فصل

SN - 9780081020098

SP - 183

EP - 252

BT - Naturally Occurring Radioactive Materials in Construction

ER -

From NORM by-products to building materials

Abstract

UN SDGs

Keywords

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this