TY - JOUR
T1 - Fluorination of Li-Rich Lithium-Ion-Battery Cathode Materials by Fluorine Gas
T2 - Chemistry, Characterization, and Electrochemical Performance in Half Cells
AU - Breddemann, Ulf
AU - Erickson, Evan M.
AU - Davis, Victoria
AU - Schipper, Florian
AU - Ellwanger, Mathias
AU - Daub, Michael
AU - Hoffmann, Anke
AU - Erk, Christoph
AU - Markovsky, Boris
AU - Aurbach, Doron
AU - Krossing, Ingo
N1 - Publisher Copyright: © 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim
PY - 2019/7/1
Y1 - 2019/7/1
N2 - Mild fluorination of high-energy nickel-cobalt-manganese (HE-NCM) materials with low pressures of elementary fluorine gas (F2) at room temperature was systematically studied. The fluorinated HE-NCM samples were analysed by ion chromatography, inductively coupled plasma mass spectrometry, FT-IR spectroscopy, powder X-ray diffraction, magic angle spinning NMR spectroscopy, scanning electron microscopy, thermo-gravimetric analysis, differential thermal analysis, electrochemical testing, and X-ray photoelectron spectroscopy. The treatment of the cathode materials with low pressures (a few hundred mbar) of elementary fluorine gas at room temperature led to the elimination of the basic surface film (LiOH, Li2CO3, Li2O, etc.), and the resulting thin amorphous LiF film led to increased capacity and long-term stability of the battery. Impedance built-up was greatly reduced for these systems throughout cycling. Fluorination with F2 only causes the formation of O−Me−F bonds (Me=Transition Metal), when treated with F2 at higher pressures. If O−Me−F bonds are formed, it may be detrimental to the electrode surface film resistance and cycle stability of the electrodes. However, it may be that the LiF surface content, which can expand as long as the LiMeO2 structure can be oxidized and Li+ can be extracted, has become too large and thus detrimental. Considering the evolution of differential capacity plots and taking into account the thermodynamic driving force of the F2 treatment, it is likely that the same activation processes that occur electrochemically in Li-rich materials also occur chemically, when the material is exposed to F2. Differential capacity plots show enhanced Mn4+ reduction peaks upon lithiation, when the material was exposed to F2, only possible after activation of the Li2MnO3 phase. For this reason, we believe fluorination promotes to some extent an activation of this phase.
AB - Mild fluorination of high-energy nickel-cobalt-manganese (HE-NCM) materials with low pressures of elementary fluorine gas (F2) at room temperature was systematically studied. The fluorinated HE-NCM samples were analysed by ion chromatography, inductively coupled plasma mass spectrometry, FT-IR spectroscopy, powder X-ray diffraction, magic angle spinning NMR spectroscopy, scanning electron microscopy, thermo-gravimetric analysis, differential thermal analysis, electrochemical testing, and X-ray photoelectron spectroscopy. The treatment of the cathode materials with low pressures (a few hundred mbar) of elementary fluorine gas at room temperature led to the elimination of the basic surface film (LiOH, Li2CO3, Li2O, etc.), and the resulting thin amorphous LiF film led to increased capacity and long-term stability of the battery. Impedance built-up was greatly reduced for these systems throughout cycling. Fluorination with F2 only causes the formation of O−Me−F bonds (Me=Transition Metal), when treated with F2 at higher pressures. If O−Me−F bonds are formed, it may be detrimental to the electrode surface film resistance and cycle stability of the electrodes. However, it may be that the LiF surface content, which can expand as long as the LiMeO2 structure can be oxidized and Li+ can be extracted, has become too large and thus detrimental. Considering the evolution of differential capacity plots and taking into account the thermodynamic driving force of the F2 treatment, it is likely that the same activation processes that occur electrochemically in Li-rich materials also occur chemically, when the material is exposed to F2. Differential capacity plots show enhanced Mn4+ reduction peaks upon lithiation, when the material was exposed to F2, only possible after activation of the Li2MnO3 phase. For this reason, we believe fluorination promotes to some extent an activation of this phase.
KW - Li-rich cathode materials
KW - electrochemical testing
KW - fluorine gas
KW - lithium-ion batteries
KW - surface fluorination
UR - http://www.scopus.com/inward/record.url?scp=85068978258&partnerID=8YFLogxK
U2 - 10.1002/celc.201900733
DO - 10.1002/celc.201900733
M3 - مقالة
SN - 2196-0216
VL - 6
SP - 3337
EP - 3349
JO - ChemElectroChem
JF - ChemElectroChem
IS - 13
ER -