Digital joinery for hybrid carpentry

Shiran Magrisso; Moran Mizrahi; Amit Zoran

doi:10.1145/3173574.3173741

Digital joinery for hybrid carpentry

Shiran Magrisso, Moran Mizrahi, Amit Zoran

The Rachel and Selim Benin School of Engineering and Computer Science

The Hebrew University of Jerusalem

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

The craft of carpentry relies on joinery: the connections between pieces of wood to create multipart structures. In traditional woodworking, joints are limited to the manual chisel skills of the craftsperson, or to capabilities of the machines, which favorite 90° or 180° angle joints with no more than two elements. We contribute an interactive design process in which joints are generated digitally to allow for unrestricted beam connectors, then produced from Nylon-12 using selective laser sintering (SLS) 3D printing. We present our Generative Joinery Design Tool and demonstrate our system on a selection of stools. The paper exemplifies the potential of Digital Joinery to enhance carpentry by incorporating a hybrid and interactive level of design sophistication and affordances that are very hard to achieve with traditional skills and tools.

Original language	English
Title of host publication	CHI 2018 - Extended Abstracts of the 2018 CHI Conference on Human Factors in Computing Systems
Subtitle of host publication	Engage with CHI
ISBN (Electronic)	9781450356206, 9781450356213
DOIs	https://doi.org/10.1145/3173574.3173741
State	Published - 20 Apr 2018
Event	2018 CHI Conference on Human Factors in Computing Systems, CHI 2018 - Montreal, Canada Duration: 21 Apr 2018 → 26 Apr 2018

Publication series

Name	Conference on Human Factors in Computing Systems - Proceedings
Volume	2018-April

Conference

Conference	2018 CHI Conference on Human Factors in Computing Systems, CHI 2018
Country/Territory	Canada
City	Montreal
Period	21/04/18 → 26/04/18

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 9 Industry, Innovation, and Infrastructure

Keywords

3D printing
Carpentry
Computer-aided design
Design
Digital fabrication
Hybrid
Joinery
Woodwork

All Science Journal Classification (ASJC) codes

Software
Human-Computer Interaction
Computer Graphics and Computer-Aided Design

Access to Document

10.1145/3173574.3173741

Cite this

@inproceedings{5974888625fc4591a9fc7d8fd04b193d,

title = "Digital joinery for hybrid carpentry",

abstract = "The craft of carpentry relies on joinery: the connections between pieces of wood to create multipart structures. In traditional woodworking, joints are limited to the manual chisel skills of the craftsperson, or to capabilities of the machines, which favorite 90° or 180° angle joints with no more than two elements. We contribute an interactive design process in which joints are generated digitally to allow for unrestricted beam connectors, then produced from Nylon-12 using selective laser sintering (SLS) 3D printing. We present our Generative Joinery Design Tool and demonstrate our system on a selection of stools. The paper exemplifies the potential of Digital Joinery to enhance carpentry by incorporating a hybrid and interactive level of design sophistication and affordances that are very hard to achieve with traditional skills and tools.",

keywords = "3D printing, Carpentry, Computer-aided design, Design, Digital fabrication, Hybrid, Joinery, Woodwork",

author = "Shiran Magrisso and Moran Mizrahi and Amit Zoran",

note = "Publisher Copyright: {\textcopyright} 2018 Association for Computing Machinery.; 2018 CHI Conference on Human Factors in Computing Systems, CHI 2018 ; Conference date: 21-04-2018 Through 26-04-2018",

year = "2018",

month = apr,

day = "20",

doi = "10.1145/3173574.3173741",

language = "الإنجليزيّة",

series = "Conference on Human Factors in Computing Systems - Proceedings",

booktitle = "CHI 2018 - Extended Abstracts of the 2018 CHI Conference on Human Factors in Computing Systems",

}

Magrisso, S, Mizrahi, M & Zoran, A 2018, Digital joinery for hybrid carpentry. in CHI 2018 - Extended Abstracts of the 2018 CHI Conference on Human Factors in Computing Systems: Engage with CHI. Conference on Human Factors in Computing Systems - Proceedings, vol. 2018-April, 2018 CHI Conference on Human Factors in Computing Systems, CHI 2018, Montreal, Canada, 21/04/18. https://doi.org/10.1145/3173574.3173741

Digital joinery for hybrid carpentry. / Magrisso, Shiran; Mizrahi, Moran; Zoran, Amit.
CHI 2018 - Extended Abstracts of the 2018 CHI Conference on Human Factors in Computing Systems: Engage with CHI. 2018. (Conference on Human Factors in Computing Systems - Proceedings; Vol. 2018-April).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Digital joinery for hybrid carpentry

AU - Magrisso, Shiran

AU - Mizrahi, Moran

AU - Zoran, Amit

PY - 2018/4/20

Y1 - 2018/4/20

N2 - The craft of carpentry relies on joinery: the connections between pieces of wood to create multipart structures. In traditional woodworking, joints are limited to the manual chisel skills of the craftsperson, or to capabilities of the machines, which favorite 90° or 180° angle joints with no more than two elements. We contribute an interactive design process in which joints are generated digitally to allow for unrestricted beam connectors, then produced from Nylon-12 using selective laser sintering (SLS) 3D printing. We present our Generative Joinery Design Tool and demonstrate our system on a selection of stools. The paper exemplifies the potential of Digital Joinery to enhance carpentry by incorporating a hybrid and interactive level of design sophistication and affordances that are very hard to achieve with traditional skills and tools.

AB - The craft of carpentry relies on joinery: the connections between pieces of wood to create multipart structures. In traditional woodworking, joints are limited to the manual chisel skills of the craftsperson, or to capabilities of the machines, which favorite 90° or 180° angle joints with no more than two elements. We contribute an interactive design process in which joints are generated digitally to allow for unrestricted beam connectors, then produced from Nylon-12 using selective laser sintering (SLS) 3D printing. We present our Generative Joinery Design Tool and demonstrate our system on a selection of stools. The paper exemplifies the potential of Digital Joinery to enhance carpentry by incorporating a hybrid and interactive level of design sophistication and affordances that are very hard to achieve with traditional skills and tools.

KW - 3D printing

KW - Carpentry

KW - Computer-aided design

KW - Design

KW - Digital fabrication

KW - Hybrid

KW - Joinery

KW - Woodwork

UR - http://www.scopus.com/inward/record.url?scp=85046970949&partnerID=8YFLogxK

U2 - 10.1145/3173574.3173741

DO - 10.1145/3173574.3173741

M3 - منشور من مؤتمر

T3 - Conference on Human Factors in Computing Systems - Proceedings

BT - CHI 2018 - Extended Abstracts of the 2018 CHI Conference on Human Factors in Computing Systems

T2 - 2018 CHI Conference on Human Factors in Computing Systems, CHI 2018

Y2 - 21 April 2018 through 26 April 2018

ER -

Digital joinery for hybrid carpentry

Abstract

Publication series

Conference

UN SDGs

Keywords

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this