Characterization of AISI 4340 corrosion products using Raman spectroscopy

E. Hazan; Y. Sadia; Y. Gelbstein

doi:10.1016/j.corsci.2013.05.002

Characterization of AISI 4340 corrosion products using Raman spectroscopy

E. Hazan, Y. Sadia, Y. Gelbstein

Department of Materials Engineering

Ben-Gurion University of the Negev

Research output: Contribution to journal › Article › peer-review

Abstract

Most of the currently available corrosion product characterization techniques require extensive samples preparation methods and cannot be employed under aqueous conditions. Raman spectroscopy possesses the advantage of characterization of the corrosion products under practical operation conditions, including aqueous, without any sample preparation procedures. The present study examines the corrosion characteristics of AISI-4340 steel at aqueous and atmospheric environments using Raman spectroscopy. FeO, Fe₂O₃, and Fe₃O₄ were observed as the main corrosion products. The measured oxides thicknesses ratio were compared to the theoretic value obtained from Tammann equation.

Original language	American English
Pages (from-to)	414-418
Number of pages	5
Journal	Corrosion Science
Volume	74
DOIs	https://doi.org/10.1016/j.corsci.2013.05.002
State	Published - 1 Sep 2013

Keywords

A. Low alloy steel
B. Raman spectroscopy
C. Atmospheric corrosion
C. High temperature corrosion
C. Oxidation
C. Rust

All Science Journal Classification (ASJC) codes

General Chemistry
General Chemical Engineering
General Materials Science

Access to Document

10.1016/j.corsci.2013.05.002

Cite this

@article{f0160df4be3349c89662d80df8f1fd1b,

title = "Characterization of AISI 4340 corrosion products using Raman spectroscopy",

abstract = "Most of the currently available corrosion product characterization techniques require extensive samples preparation methods and cannot be employed under aqueous conditions. Raman spectroscopy possesses the advantage of characterization of the corrosion products under practical operation conditions, including aqueous, without any sample preparation procedures. The present study examines the corrosion characteristics of AISI-4340 steel at aqueous and atmospheric environments using Raman spectroscopy. FeO, Fe2O3, and Fe3O4 were observed as the main corrosion products. The measured oxides thicknesses ratio were compared to the theoretic value obtained from Tammann equation.",

keywords = "A. Low alloy steel, B. Raman spectroscopy, C. Atmospheric corrosion, C. High temperature corrosion, C. Oxidation, C. Rust",

author = "E. Hazan and Y. Sadia and Y. Gelbstein",

year = "2013",

month = sep,

day = "1",

doi = "10.1016/j.corsci.2013.05.002",

language = "American English",

volume = "74",

pages = "414--418",

journal = "Corrosion Science",

issn = "0010-938X",

publisher = "Elsevier Ltd.",

}

TY - JOUR

T1 - Characterization of AISI 4340 corrosion products using Raman spectroscopy

AU - Hazan, E.

AU - Sadia, Y.

AU - Gelbstein, Y.

PY - 2013/9/1

Y1 - 2013/9/1

N2 - Most of the currently available corrosion product characterization techniques require extensive samples preparation methods and cannot be employed under aqueous conditions. Raman spectroscopy possesses the advantage of characterization of the corrosion products under practical operation conditions, including aqueous, without any sample preparation procedures. The present study examines the corrosion characteristics of AISI-4340 steel at aqueous and atmospheric environments using Raman spectroscopy. FeO, Fe2O3, and Fe3O4 were observed as the main corrosion products. The measured oxides thicknesses ratio were compared to the theoretic value obtained from Tammann equation.

AB - Most of the currently available corrosion product characterization techniques require extensive samples preparation methods and cannot be employed under aqueous conditions. Raman spectroscopy possesses the advantage of characterization of the corrosion products under practical operation conditions, including aqueous, without any sample preparation procedures. The present study examines the corrosion characteristics of AISI-4340 steel at aqueous and atmospheric environments using Raman spectroscopy. FeO, Fe2O3, and Fe3O4 were observed as the main corrosion products. The measured oxides thicknesses ratio were compared to the theoretic value obtained from Tammann equation.

KW - A. Low alloy steel

KW - B. Raman spectroscopy

KW - C. Atmospheric corrosion

KW - C. High temperature corrosion

KW - C. Oxidation

KW - C. Rust

UR - http://www.scopus.com/inward/record.url?scp=84879409632&partnerID=8YFLogxK

U2 - 10.1016/j.corsci.2013.05.002

DO - 10.1016/j.corsci.2013.05.002

M3 - Article

SN - 0010-938X

VL - 74

SP - 414

EP - 418

JO - Corrosion Science

JF - Corrosion Science

ER -

Characterization of AISI 4340 corrosion products using Raman spectroscopy

Abstract

Keywords

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Fingerprint

Cite this