±10.5 v 16-channel programmable pulse generator using high-voltage BCD CMOS process

Chua Chin Wang; Deng Shian Wang; Tzu Chiao Sung; Yi Hong Wu; Doron Shmilovitz

doi:10.1049/el.2014.1766

±10.5 v 16-channel programmable pulse generator using high-voltage BCD CMOS process

Chua Chin Wang, Deng Shian Wang, Tzu Chiao Sung, Yi Hong Wu, Doron Shmilovitz

School of Electrical Engineering

Tel Aviv University

Research output: Contribution to journal › Article › peer-review

Abstract

A ±10.5 V programmable pulse generator (PPG) fabricated by highvoltage (HV) BCD CMOS technology is demonstrated, where a charge pump composed of five cascaded voltage doublers is included to boost the voltage from 2.5 V to be higher than 10 V. A crossvoltage-domain operational amplifier is proposed to carry out voltage level conversion and amplification. HV analogue switches are also proposed to change the direction of output currents. The proposed 16- channel PPG is realised on silicon, where the die area is 5.43 mm₂. Physical measurements justify that the maximum output current is 525 μA, and the largest voltage of the pulses is ±10.5 V.

Original language	English
Pages (from-to)	1797-1799
Number of pages	3
Journal	Electronics Letters
Volume	50
Issue number	24
DOIs	https://doi.org/10.1049/el.2014.1766
State	Published - 1 Nov 2014

All Science Journal Classification (ASJC) codes

Electrical and Electronic Engineering

Access to Document

10.1049/el.2014.1766

Cite this

@article{f1c1a60afca04fb0974ba7022ade50f0,

title = "±10.5 v 16-channel programmable pulse generator using high-voltage BCD CMOS process",

abstract = "A ±10.5 V programmable pulse generator (PPG) fabricated by highvoltage (HV) BCD CMOS technology is demonstrated, where a charge pump composed of five cascaded voltage doublers is included to boost the voltage from 2.5 V to be higher than 10 V. A crossvoltage-domain operational amplifier is proposed to carry out voltage level conversion and amplification. HV analogue switches are also proposed to change the direction of output currents. The proposed 16- channel PPG is realised on silicon, where the die area is 5.43 mm2. Physical measurements justify that the maximum output current is 525 μA, and the largest voltage of the pulses is ±10.5 V.",

author = "Wang, {Chua Chin} and Wang, {Deng Shian} and Sung, {Tzu Chiao} and Wu, {Yi Hong} and Doron Shmilovitz",

note = "Publisher Copyright: {\textcopyright} The Institution of Engineering and Technology 2014.",

year = "2014",

month = nov,

day = "1",

doi = "10.1049/el.2014.1766",

language = "الإنجليزيّة",

volume = "50",

pages = "1797--1799",

journal = "Electronics Letters",

issn = "0013-5194",

publisher = "John Wiley & Sons Inc.",

number = "24",

}

TY - JOUR

T1 - ±10.5 v 16-channel programmable pulse generator using high-voltage BCD CMOS process

AU - Wang, Chua Chin

AU - Wang, Deng Shian

AU - Sung, Tzu Chiao

AU - Wu, Yi Hong

AU - Shmilovitz, Doron

PY - 2014/11/1

Y1 - 2014/11/1

N2 - A ±10.5 V programmable pulse generator (PPG) fabricated by highvoltage (HV) BCD CMOS technology is demonstrated, where a charge pump composed of five cascaded voltage doublers is included to boost the voltage from 2.5 V to be higher than 10 V. A crossvoltage-domain operational amplifier is proposed to carry out voltage level conversion and amplification. HV analogue switches are also proposed to change the direction of output currents. The proposed 16- channel PPG is realised on silicon, where the die area is 5.43 mm2. Physical measurements justify that the maximum output current is 525 μA, and the largest voltage of the pulses is ±10.5 V.

AB - A ±10.5 V programmable pulse generator (PPG) fabricated by highvoltage (HV) BCD CMOS technology is demonstrated, where a charge pump composed of five cascaded voltage doublers is included to boost the voltage from 2.5 V to be higher than 10 V. A crossvoltage-domain operational amplifier is proposed to carry out voltage level conversion and amplification. HV analogue switches are also proposed to change the direction of output currents. The proposed 16- channel PPG is realised on silicon, where the die area is 5.43 mm2. Physical measurements justify that the maximum output current is 525 μA, and the largest voltage of the pulses is ±10.5 V.

UR - http://www.scopus.com/inward/record.url?scp=84915766796&partnerID=8YFLogxK

U2 - 10.1049/el.2014.1766

DO - 10.1049/el.2014.1766

M3 - مقالة

SN - 0013-5194

VL - 50

SP - 1797

EP - 1799

JO - Electronics Letters

JF - Electronics Letters

IS - 24

ER -

±10.5 v 16-channel programmable pulse generator using high-voltage BCD CMOS process

Abstract

All Science Journal Classification (ASJC) codes

Access to Document

Other files and links

Cite this