Strong, tough and bio-degradable polymer-based 3D-ink for fused filament fabrication (FFF) using WS2 nanotubes

Hila Shalom, Sergey Kapishnikov, Vlad Brumfeld, Naum Naveh, Reshef Tenne, Noa Lachman

نتاج البحث: نشر في مجلةمقالةمراجعة النظراء

ملخص

WS2 inorganic nanotubes (WS2-NT) have been incorporated into Polylactic Acid (PLA) by melt mixing to create a bio-degradable, mechanically reinforced nanocomposite filament. The filament was then processed by Fused Filament Fabrication (FFF) 3D-printer, and the morphology and characteristics before and after printing were compared. We found that addition of WS2-NT to PLA by extrusion mixing increases the elastic modulus, yield strength and strain-at-failure by 20%, 23% and 35%, respectively. Moreover, we found that the printing process itself improves the dispersion of WS2-NT within the PLA filament, and does not require changing of the printing parameters compared to pure PLA. The results demonstrate the advantage of WS2-NT as reinforcement specifically in 3D-printable polymers, over more traditional nano-reinforcements such as graphene and carbon nanotubes. WS2-NT based 3D-printable nanocomposites can be used for variety of applications from custom-made biodegradable scaffold of soft implants such as cartilage-based organs and biodegradable soft stents to the more general easy-to-apply nano-reinforced polymers.

اللغة الأصليةالإنجليزيّة
رقم المقال8892
عدد الصفحات8
دوريةScientific Reports
مستوى الصوت10
رقم الإصدار1
المعرِّفات الرقمية للأشياء
حالة النشرنُشِر - 1 ديسمبر 2020

All Science Journal Classification (ASJC) codes

  • !!General

بصمة

أدرس بدقة موضوعات البحث “Strong, tough and bio-degradable polymer-based 3D-ink for fused filament fabrication (FFF) using WS2 nanotubes'. فهما يشكلان معًا بصمة فريدة.

قم بذكر هذا